
Remote Control & Server Controller (1.0)

Copyright (C) 1991-1993, Apple Computer, Inc.
All Rights Reserved
by Jim Luther, Apple Developer Technical Support

Remote Control and Server Controller are free software and can be distributed
freely by individuals.  For commercial distribution or bulletin board
distribution please contact Apple Software Licensing.

Remote Control and Server Controller are distributed "as is" and unsupported by
Apple or the author.  Please don't call Apple or the author for technical
support on this program.

********** What's it do? **********

The two applications, Remote Control and Server Controller, allow the owner of
a Macintosh to start or stop the file server running on that Macintosh using
another Macintosh at another location on the network.

********** Setup **********

To setup the server Macintosh:
* Drop the Server Controller application in the System Folder's Startup Items
folder.
* Make sure the Macintosh Owner Name, Owner Password, and Macintosh Name of are
set with the Sharing Setup control panel or AppleShare Admin application. *
Make sure Program Linking is "on" with the Sharing Setup control panel. * Make
sure Program Linking is enabled for the owner of the system with the Users &
Groups control panel or AppleShare Admin application. * Make sure AppleTalk is
"on" with the Chooser.
* Reboot the system; Server Controller will be launched and if everything is
setup correctly, you won't see any error notification dialogs.

To setup and use the remote Macintosh to control the server remotely: * Make
sure Program Linking is "on" with the Sharing Setup control panel. * Make sure
AppleTalk is "on" with the Chooser.
* Run the Remote Control application.
* Select "Connect to Remote Macintosh..." from the Remote menu. * Use the
program linking and the user identity dialogs to connect to the server
Macintosh as the server's owner (other users cannot connect). * Using Remote
Control from here on is pretty obvious; just quit, or disconnect and quit when
you're done.

********** About Server Controller **********

Server Controller is a faceless background application; it has no user
interface and won't show up in the Application menu.  When it's launched, it
first performs a few checks to make sure it can do its job; if it can't, then
it puts up an error notification dialog describing the problem and then quits.
If everything is set up correctly, then it opens a PPC port and goes to sleep
until the server's owner, using the Remote Control application, connects with
it.  While the owner is connected,  Server Controller sends status information
to the Remote Control application and makes server control calls passed to it
by Remote Control.

If you need to quit Server Controller, you can use ProcDoggie or Task-It (two
other DTS sample applications), or you can drag Server Controller out of the
Startup Items folder and reboot.

********** About Remote Control **********

Remote Control displays status information it gets from Server Controller and
send server control commands to Server Controller to start the server, stop the
server, or cancel the start or stop operation.  The only menu items of real
interest are File, which lets you quit Remote Control, and Remote, which lets
you connect to or disconnect from the Server Controller application.

Once a connection is made with the Server Controller application, a small
window will appear with a single button and some status information.  The
button will either be Start, Stop, or Cancel depending on current status of the
remote file server.  The status information returned is:
* Macintosh Name, the name of the Macintosh running Server Controller you've
connected to.
* Zone, the zone the Macintosh running Server Controller you've connected to is
in.  (If there are no zones, this field will be "*")
* Status, the status of the remote file server.

To disconnect from the Server Controller application, you can use either the
Remote menu or you can Quit the Remote Control application.

********** Release Notes **********

1.0d2 - Although this is only version 1.0d2, it is completely usable and has no
crashing bugs that I know of.  I'll be making several major internal changes to
both applications before releasing another version, but since this version
works and is useful, I thought I'd pass it around and get a little feedback on
the user interface, etc.

Remote Control 1.0d2++ - I've fixed a few minor bugs and rebuilt the program
with the final ServerControlIntf file.

Server Controller 1.0d2++ - I fixed a problem with case-insensitivity in the
user name and rebuilt the program with the final ServerControlIntf file.

Remote Control 1.0 - If the PPC connection is broken, the application window is
now closed.

Server Controller 1.0 - Server 


Posted to:

Apple Support Area
Apple Software Updates
Utilities Folder


4-APR-94